So far I’ve written a series of blog posts about knitting stitch structure, and the three paths the yarn can take between two stitches if it isn’t pulled through a stitch that is between them.
- Basic knitting stitch structure, part one
- Basic knitting stitch structure, part two
- Knitted slip stitch structure
- Brioche knitting stitch structure, part one
This post is going to be different, and it starts with a story.
More than fifteen years ago, I wanted to knit a baby hat for a neighbor, so I browsed through my Mon Tricot stitch dictionary and was taken by the picture for Brioche Rib. Here’s an exact copy of the instructions from the book, using their knitting instruction style:
multiple of 2
Row 1: K
Row 2: * K 1, k 1 B *. (See page 32) k 2.
rep row 2 only.
Mon Tricot 900 Stitches Patterns, p.39
Here’s what page 32 has to say about k 1 B, which it confusingly also calls a double stitch. I will always call it k1b:
“Double stitch (k 1 B or p 1 B)
“This must not be confused with “k 2 together or a “twice knitted” stitch. To form a double stitch insert the right needle through the centre of the stitch below the next stitch to be knitted, so that both are knitted at the same time. Two double stitches must always have an ordinary plain or purl stitch between them.”
Mon Tricot 900 Stitches Patterns, p.32
So I knit a hat, I worked out how to do decreases that worked for it on my own, and I published the pattern for free before I started publishing patterns in a more professional manner. It wasn’t ever test knit or tech edited, which is why it isn’t currently available. But here’s some pictures. (If I still had the hat, I’d take better pictures, but there it is.)
Anyway, someone in the knitting world, I don’t remember who, except that I remember them as being an experienced and knowledgeable knitter, told me that no, this isn’t actually brioche, because it uses a different method, and besides, in her experience, they were slightly different structures. I took her word for it, though I was slightly perplexed because they looked much the same to me. But I didn’t knit any swatches to see. I just shrugged and thought she must be right because I’d found her other information about knitting correct.
I’ve come across this idea of the k1b version not being proper brioche because of the different method in other places too. I don’t know why I didn’t argue, because my original exposure called it brioche, and there must have been a reason for the author of the Mon Tricot books to call it that!
When I started planning this series of blog posts, I knit two tiny swatches, one in yarnover/slip-stitch brioche rib, and one in k1b brioche rib. I was going to argue that they might appear slightly different, but the overall structure was similar enough that they both fall in the same category.
After all, we call all the knitted fabric with the same structure “knitting” regardless of method, right? “Continental” and “English”; machine knit, hand knit, loom knit, and finger knit. So long as the structure is the same, the means don’t matter.
Why should it be different for brioche?
Anyway, I knit my two swatches and I looked at them. There was no slight difference between the stitches, aside from the selvedges, but that’s because I used different methods at the selvedges, following the instructions at the two different blog posts I read. (You can see that I haven’t quite got the knack of the selvedge used in the left swatch, but that’s not important for the point of this post.)
I thought and thought and thought, even waking up in the middle of the night with the problem on my mind. Mon Tricot called what I was knitting “brioche rib”. I was reading that people thought the k1b method was “fisherman’s rib”, so I looked up fisherman’s rib. It turns out to be a slightly different set of instructions from the Mon Tricot brioche rib:
Needs one row of plain knitting as a set up row.
Row 1: *p1, k1b; work from *.
I wondered to myself if maybe people assumed that I was using this method, and if maybe the purl instead of the knit is the thing that makes the slightly different structure.
It’s the rightmost swatch here. Nope. It looks just the same.
Here they are, all stretched out. See? The middle one got stretched more side-to-side, but I think these show that they’re all the same structure. I mean, I could be lying to you, though I don’t know why I would do that. I could have knit them all in one single method; the only way to be sure is to try it for yourself. I find the structure easiest to see in the two-color versions. Here’s links to instructions for the first two:
- Two color brioche, with slip stitches and yarnovers.
- Two color fisherman’s rib. (Contains a video and a direct link to a free PDF hosted on Ravelry. Ravelry itself is not displayed.)
And my instructions for two color brioche rib made with the k1b method:
Two color k1b Brioche Rib
Requires circular needle.
Cast on a multiple of 2 stitches in color B and purl one row.
Row 1 (RS): In Color A: k1, *k1, k1b; work from * to last stitch, k1. Slide stitches to other end of needle without turning work.
Row 2 (RS): In Color B: p1, *p1b, p1; work from * to last stitch, p1. Turn work.
Row 3 (WS): In Color A: p1, *p1b, p1; work from * to last stitch, p1. Slide stitches to other end of needle without turning work.
Row 4 (WS): In Color B: k1, *k1, k1b; work from * to last stitch, k1. Turn work.
(Note that the selvedges on this are messy; I haven’t figured out the best method for this.)
So, how does this have the same structure as the yarnover/slip stitch method? Remember that I described the yarn that would otherwise have been pulled through the slip stitch being lifted over the top of the stitch as a yarnover.
When a stitch is worked as k1b or p1b, the new stitch is pulled through the stitch below the one that would usually be knit. The stitch below thus effectively becomes a slip stitch, and the loop that was originally pulled through it drops out of the stitch; it can’t slide down to become a horizontal bar in front of or behind the stitch because the new loop is pulled under it to support.
It doesn’t matter if the stitch that unravels was knit or purl, because once it unravels, and the stitch is pulled on in the course of knitting or washing, the yarn that was made into knit or purl slides into the yarnover position for brioche.
I have no opinion about which method is easier, with one exception: when undoing the results, it’s slightly easier for me to see how to go forward again with the yarnover/slip stitch method.
There are other brioche stitch patterns aside from brioche rib; I’ve certainly seen several with the slip stitch-yarnover method. The Mon Tricot books all have k1b versions of brioche rib, brioche honeycomb, half brioche, and contrary brioche, which is similar to what I’ve seen called syncopated brioche; it just has a different number of rows. The Mon Tricot stitch dictionary with the most k1b brioche stitches is the last one, with 1500 stitch patterns in it.
There is also a book called Knit One Below, by Elise Duvekot, from XRX books. Duvekot came up with a (k1b, k1) fabric that’s a bit different from brioche rib, kind of like a stockinette version of it (though not what Barbara Walker calls brioche stockinette). Duvekot doesn’t use the term brioche or compare her technique to it, though I think it fits in with other brioche. It includes some k1b decrease methods, which is helpful.
So, on the one hand, I think this is all brioche. On the other hand, there are difficulties to calling it all brioche.
If I publish a pattern using the kind of brioche I first learned, and I don’t say in the description the purchaser sees before buying that it’s using the much less common k1b method, then a knitter who buys it might be highly disappointed because of its unfamiliarity. The two methods feel different even though the structure is the same. The motions are different, and I think of the methods as being half a row out of phase with each other.
I don’t know how the decreases and increases compare; I have to do some swatches there. I’d like to figure that part out; I think it would be fun.
I don’t know how to convert patterns for finished objects from one mode to the other or if it’s even worthwhile.
I don’t think one is superior to the other.
I just think it’s all brioche.